Fixed Hinge Applications

Works well for both long and short door lengths.

Overall coverage and filling the door to chassis gap isn't required

Preference is for smaller hinges spaced evenly for a more symmetrical look

Fewer alignment issues for longer length doors due to accumulating tolerances for hole placement

Mounting can be done by welding, or with perforations for fasteners

Less hinge surface to have plated as compared to a continuous hinge length

Less hinge material as compared to a continuous hinge length, translating to possible lower costs

Custom hinge possibilities are high.

When a longer length is needed along a large door, but also works well in several shorter lengths on the door

The hinge is supporting weight over a long length

A lighter gauge hinge may hold more weight due to it's length

For an overall coverage look or when you want the hinge to completely fill a gap

More surface for door to hinge connection

Mounting can be done by welding, or with perforations for fasteners

Custom hinge possibilities are high.

When a longer length is needed along a large door, but also works well in several shorter lengths on the door

The hinge is supporting weight over a long length

A lighter gauge hinge may hold more weight due to it's length

For an overall coverage look or when you want the hinge to completely fill a gap

More surface for door to hinge connection

Mounting can be done by welding, or with perforations for fasteners

Custom hinge possibilities are high.

When a longer length is needed along a large door, but also works well in several shorter lengths on the door

The hinge is supporting weight over a long length

For an overall coverage look or when you want the hinge to completely fill a gap

More surface for door to hinge connection

Mounting can be done with perforations for fasteners

Custom hinge possibilities are low.

• Standard widths, colors and lengths offered

• May be cut to any length

When closed, hinge cannot be seen or tampered with

Concealed hinges have a longer curved leaf to allow for a minimum gap between the door and chassis

Invisible hinges are mounted completely within the door thickness and embedded into the chassis as well

Mounting can be done with perforations for fasteners

Custom hinge possibilities are low.