Removable Hinges
Shop by Category
Removable Hinge Applications
-
Two piece male and female set allows for easy removal and reassembly of the door.
-
Hinge relies on weight and gravity to keep the male and female connected in vertical applications, but requires an outside stop on the door to prevent the disassemble process in horizontal applications.
-
Hinge separation requires female half to be lifted off, or slid off the pin half.
-
Right hand and left hand versions allow for mounting on mirror image doors
-
Works better for shorter length doors due to alignment
-
Mounting can be done by welding, or with perforations for fasteners
-
Custom hinge possibilities are high.
-
Two piece male and female set allows for easy removal and reassembly of the door
-
Hinge relies on weight and gravity to keep the male and female connected in vertical applications, but requires an outside stop on the door to prevent the disassemble process in horizontal applications.
-
Hinge separation requires female half to be lifted off, or slid off the pin half.
-
Leafless design allows for mounting on either side of the door.
-
Works better for shorter length doors due to alignment
-
Leafless design offers a cleaner, more streamlined look.
-
Leafless design of Weld-On hinges allows for mounting by welding only.
-
Custom hinge possibilities are low.
-
Custom sizes are available depending on order quantity
-
Change pin material. Body and pins do not have to be the same material
-
Add a grease fitting for lubrication capability
-
-
Two piece male and female set allows for easy removal and reassembly of the door
-
Pin is locked in the extended position and requires a rotation and retraction to pull the pin back to disassemble the hinge set. This hinge set can be used in both vertical and horizontal applications and always requires a manual operation to separate the two hinge pieces.
-
Due to retracting hinge pins, hinge separation is only a matter of pulling door away from chassis. No lifting up or pulling to the side is necessary.
-
Mounting can be done by welding, or with perforations for fasteners
-
Custom hinge possibilities are low.
-
Length and leaf width changes possible, but dependent on production quantity
-
Bends, leaf swaging and offsets are limited due to pin rotation stem handle
-
Holes, slots, other perforations
-
Notches and cutouts
-
Radius and clipped corners
-
Hardware inserts, studs and standoffs
-
-
Single piece allows for easy removal and reassembly of the door
-
Hinge relies on weight and gravity to keep the male and female connected in vertical applications, but requires an outside stop on the door to prevent the disassemble process in horizontal applications.
-
Works better for shorter length doors due to alignment
-
Mounting can be done by welding, or with perforations for fasteners
-
Custom hinge possibilities are low.
-
Custom sizes are available depending on order quantity
-
-
Pins lift, then door moves
-
Works better for shorter length doors due to alignment
-
Mounting can be done by welding, or with perforations for fasteners
-
Custom hinge possibilities are low.
-
Custom sizes are available depending on order quantity
-